Management
System certified compliant with the requirements of BS EN ISO 9001:2000
by BSI
Products
for use in Potentially Explosive Atmospheres certified in accordance
with the ATEX Directive
Gauge
Hatch - Foot Operated, Lockable
For
Free Vented Atmospheric Tanks
MTP 101 Series Gauge Hatch provides tank access where manual level
gauging, temperature measurement or sampling is required.
In
the closed position the unit may be padlocked to prevent unauthorised
access.
Free lift design with safety foot pedal
Available
in aluminium, cast iron, carbon steel, stainless steel
Non-sparking
O-Ring seal
ANSI
and DIN flanges
Sizes
4” to 10
Gauge
Hatch - Foot Operated, Lockable
Pressure
sealing up to 2.5psig
MTP
102 Series Gauge Hatch provides secure tank access where manual
level gauging, temperature measurement or sampling is required together
with a gas tight seal to 2.5psig.
In the closed position the unit may be padlocked to prevent unauthorised
access.
The
foot pedal enables the operator to open the cover whilst maintaining
both hands free to perform gauging or sampling of the tank contents.
Lockable
handle with safety foot pedal
Available in aluminium, cast iron, carbon steel, stainless steel
Non-sparking
O-Ring seal
ANSI
and DIN flanges
Sizes
4” to 10"
Gauge
Hatch combined with Pressure and Vacuum Relief - Lockable
MTP
103 Gauge Hatch is a combined unit allowing access for manual level
gauging or sampling and providing pressure & vacuum relief
Economical
combined unit
Constructed
in aluminium
Non
sparking seat insert
ANSI
& DIN flanges
8"
size
Standard
settings 3.5" wg pressure & 0. 865" wg vacuum
The
unit may be padlocked to ensure security when closed.
Gauge Hatch combined with Free Vent - Lockable
MTP
104 Series Free Vents providee easy tank access for sampling or
dipping tank contents whilst allowing the tank to vent safely through
the weatherhood.
Available
in aluminium, cast iron, carbon steel, stainless steel
Sizes
4", 6" & 8"
Stainless
screen screen mesh
ANSI
& DIN flanges
Non
sparking o ring seal
The
unit may be padlocked to ensure security when closed.
Free Vents
MTP
240 and 241 Series Free vents for use on any atmospheric tank, protecting
against internal pressure build up. The large weatherhood is designed
for maximum air flow.
Available
in aluminium, cast iron, carbon steel, stainless steel
Sizes
2", 3", 4", 6", 8" 10" and 12".
Stainless
steel screen mesh
Maximum
air flow
ANSI
& DIN flanges (CNC 241 welds direct to tank roof)
Floating
Roof Rim Vent
MTP
104 Series Rim Vent provides low cost pressure relief on floating
roof tanks.
Aluminium
construction
Standard
6" flanged or screwed units
Set
pressure 0.865" wg
Low
cost pressure relief
Stainless
steel screen mesh
171
Access Manway
Access
Manhole Cover for Bulk Storage Tanks
MTP
171 Series of non-sparking low pressure manhole covers provide easy
access to low pressure storage tanks for maintenance and cleaning
purposes.
The manhole is secured by a transverse beam which is attached to
the centre of the cover. This ensures even distribution of the holding
down force to form a gas tight fitting to 2.5psig.
171
Series
are manufactured by MTP in our UK manufacturing plant to exacting
quality standards and backed by over 40 years experience. Sizes
range from 18" (450mm) to 24" (600mm).
Storage
Tank Solutions Limited trading as Motherwell Tank Protection, Registered
Office : 55 king Street, Manchester, M2 4LQ, England. Registered
in England, Number 06380775
